Smooth Blog

Changelog:

• Updated to v1.02.477 xeBuild with FAT/14717/14719 Support for consoles.
• Updated to latest version 3.00 Dashlaunch beta.
• Added Full Support for FAT v2.0 RGH Dual CBs (4575,4576,4577,5772,5773,6752 , 6753)
• Added function to check automated year the boot-loaders version and select the proper version of RGH needed. - The WinXP-compatible “. exe” is included in the install - (For Those Who Have Antivir the problem, You Can Manually delete it)

Download: 360 Multi Builder v0.94

FIRMWARE 1.5b :

Fixed READING…. issue over some FAT and Slim consoles

FIRMWARE 1.5 :

Added IsoMenu in-dash (NOTE : We’re against this isos loading method and it has only been added due the users high demand, this method can be locked by microsoft in further kernel updates,use it as your own risk) , we use a special method do not touching any code at the dash (not like “someother devices”),so we avoid any detection because the drive firmware modification, to activate this new feature:

- 1. Iso games must to be at \boxzii folder of your detected SDA1 hard drive/pendrive

- 2. Use ISO GENERATOR icon to make your virtual iso(must to be regenerated each time that you store new isos) After you press generation icon,Boxzii will start the iso generation,a xbox reboot is made when finished

- 3. Enable the ISOMENU icon at the config screen Mixed Disc is detected,go to Xbox dash Audio player and select your iso

Known as version 1.1, the new TX Liteon DG-16D4S Unlocked Replacement PCB now has the unlock switch moved to the outside of the DVD drive so you can easily lock/unlock the write enable without having to take the drive apart.

We have also included LED’s to indicate the boards WE status.

Due to it’s huge success and ability to buy larger quantities of IC, we have also been able to lower the price by a massive $10 so the MSRP is now only $59.95.

Stock has already started to arrive at resellers so you don’t have to wait to buy one.

We have created a new forum to get support and also discuss features and offer your own input: http://www.team-xecuter.com/forums/f…play.php?f=186

While we have tried to make this as solid as possible for the first release, remember this is in beta so there may be bugs and other issues. We will not be held responsible for any damage that you may do to your Xbox by using these files. Everything you do is at your own risk. If you mess up don’t cry, we are not your Mom and will not hold your hand.

Features of Xecuter Fusion as of v1.0.6

Requirements:
RGH/RGH2 Console (JTAG Not Supported)

+ Turns console into full devkit
- Console has full devkit functionality
- Test kits have debugging and memory editing capabilities
- Partnernet has been blocked
- Slim devs that show up as test kits now show up as full devs

+ XEX security checks removed
- Region checks removed
- Bounding path checks removed
- Library version checks removed
- Module import version checks removed
- Media id checks removed
- Module hash checks removed

+ XGD security removed
- Bypass xgd authentication, loads retail game disks
- AP2.5 checks removed

+ Run retail executables
- Executables checked with devkit rsa key, if signature fails it
is loaded with retail encryption keys

+ Container security checks removed
- Rsa signature check removed
- License checks removed
- Arcade games run as full, even when extracted

+ Xbdm.xex
- Mounts all internal drives
- Mounts Firmware folder

+ Hud.xex
- “Family Settings” changed to “Firmware Settings”, runs config manager on press

+ Dash.xex
- Games copied to the hard drive via the dashboard no longer require the disk to be in the drive to be played

+ Fusion added features
- Boot in safe mode by pressing eject to boot (dev only)
- Loads alternate system files from Firmware\Kernel\
- Both devkit and retail hardware/accessories work
- Switch between retail or devkit system link encryption
- Switch between retail or devkit system encryption
- Bypass booting to dev launcher
- Pair any dvd drive to console
- Display cpukey, dvdkey and other important information
- Both retail and devkit profiles can be used simultaneously
- Multi disk games can be ran from hdd without problems
- Trainer launcher accessible through hot-key launch

Notes

- The custom boot animation has a small side effect where the console will take a bit longer to boot. The reason for this is that the animation does not start playing at first boot, rather it plays once the console is fully booted. It is being worked on and will be fixed soon.

- Multi-Disk Games
Multi disk games can now be run from the hard drive and still function properly when the game requests to switch disks. In order for Fusion to auto detect and switch to the next disk of a game, the game must be put into a special folder structure. Every disk for the game needs to be ripped to its own folder named disc1, disc2, etc. Each disk folder must be placed inside a folder just for that game.

Here is an example folder hierarchy:

\Battlefield 3\
\Battlefield 3\disc1\
\Battlefield 3\disc1\…
\Battlefield 3\disc2\
\Battlefield 3\disc2\…

Changelog

v1.0.6 (File Pack Size – 71MB)
+ Ported to retail consoles
+ Added XeKeys status to ConfigManager console info screen
+ Trainer launcher added, accessible through hot-key launch

v1.0.5
+ Hdd load redone, now works 10x better
+ Arcade license patch fixed to work with all arcade games
+ Hud.xex button remaps now work when in dashboard
+ Kernel folder has been changed to Firmware
+ Neighborhood now maps a few more drives
+ Major code/patch revamp and clean up
+ Retail and devkit profiles can be used, all profiles written as dev
+ Games ripped to the hdd no longer need the disc in drive to play
+ Minimum version check on module imports removed
+ Removed hdd authentication checks, retail and dev hdds now work
+ Multi disk games can be ran from the hdd without problems

v1.0.4
+ Changed hdd loader to be dynamic
+ Fixed a bug with HvxPeekPoke
+ Repurposed “Family Settings” in hud.xex to “Firmware Settings”
+ Added Config Manager to change fw settings
+ Xbdm.xex patched to show all drives in explorer
+ Xbdm.xex now mounts Kernel
+ Xex module hash checks removed
+ Fixed a dvd drive pairing bug in ConfigManager
+ Fixed a bug in xbdm.xex with mapping KERNEL:\\

v1.0.3
+ Hv extensions re-enabled
+ All XeKeys values unblocked
+ Syscall 0×75 is HvxPeekPoke(ULONGLONG Dst, ULONGLONG Src, DWORD Size)
+ Loads retail xex files
+ Loads retail game disc’s
+ Bypass xex version/media/bounding path/region checks
+ Xam/xbdm/bootanim.xex are loaded from Hdd:\Kernel\
+ Boot into recovery mode by eject press
+ Unsigned containers allowed
+ Unlicensed/unpackaged arcade games are full
+ Slim testkit bug fixed
+ Internal drive map always enabled

Fusion added features
- Boot in safe mode by pressing eject to boot (dev only)
- Loads alternate system files from Firmware\Kernel\
- Both devkit and retail hardware/accessories work
- Switch between retail or devkit system link encryption
- Switch between retail or devkit system encryption
- Bypass booting to dev launcher
- Pair any dvd drive to console
- Display cpukey, dvdkey and other important information
- Both retail and devkit profiles can be used simultaneously
- Multi disk games can be ran from hdd without problems
- Trainer launcher accessible through hot-key launch

Thanks & Greetz go out to who were directly or indirectly involved in the Fusion project.

TheFallen93, Sonic-Iso, Xenon.7, Redline99, Tiros, c0z, l_oliveira, MODFREAKz, xorloser, k3rn3l, Podger, RF1911, tydye81 & RickyB82.

Download: Do not ask for any download links. The files are compiled with the XDK and we are not allowed to host them or give links to them. If you ask it shows that you don’t bother to read anything we post so in return we won’t waste any of our time in giving you any help or advice and others re welcome to call you out for being a lazy dumbass 

Once the required information has been fill out, press Build, save your new flash image, and wait for confirmation it was successfully created.*

2. Write the image you just made in step 1 to your console using J-Runner or NandPro or your nand flashing software of choice.*

3. Using ImgBurn or your iso writing software of choice, burn the provided bootdisk iso “Fusion Bootdisk v1.0.6.iso” to a CD-R. Once the disk has been burned, place it in your console’s dvd-drive and turn the console off.*

4. With your HDD connected, the fusion nand image flashed, and the boot disk in your console’s dvd-drive, power on your console. Within a few seconds you should see the boot disk install screen appear. The boot disk will take a few moments to copy required OS files and when it is done your console will reboot. When your console reboots it will boot to either the dashboard or the dev-launcher depending on the settings you specified when creating the nand image.*

Your console is now running Fusion v1.0.6, enjoy!